Stokes Model 526

Quality Workmanship you can Trust

Stokes Model 526 and 526S are dual motion compacting presses. Pressure is exerted from above by means of an eccentric motion from below by means of a cam. Pressure is applied in both directions simultaneously for a uniform density gradient throughout the piece. It is ideally suited for producing compacts such as gears, rings, discs and bushings from a wide variety of materials.

Outstanding Design Features

Mechanical motion: all movements of the press are mechanical resulting in repeatability, low maintenance and maximum output. Press can produce up to 45 compacts per minute depending on size and material compacted.
Precision alignment of the upper punch is maintained by mounting the crosshead in heavy-duty adjustable V-Gibs.

Simple setup

Press can be operated manually and with jog provisions, and is furnished with pneumatically operated clutch and brake.
Hardened wear parts are used in critical areas for long life. The press is built to resist abrasive conditions.
Stationary core rod provides additional versatility for producing hollow parts as well as parts with blind holes or counter bores.
Optional equipment to optimize operations is available.

Technical specifications

 Model 526
Max depth of fill (in)2 5/8
Max diameter of piece (in)3
Diameter of die (in.)6
Upper punch max. Die entrance (in.)1 1/4
Stationary core rod supporting pressure (tons)5
Die Table supporting pressure15
Compacts per minute15 - 45
Maximum pressure above and below (tons)20
Maximum ejection pressure (tons)5
Power (HP)5
Height (in.)86
Width (in.)51
Net Weight (lbs)6580
Shipping weight (lbs)8350

MORE EQUIPMENT

10 ton, Single sided with pre-compression, Accepts B and D tooling, Maximum tablet diameter is 25 mm

10 ton, Double sided or Single sided with pre-compression, Accepts 328 type tooling, Maximum tablet diameter is 30 mm

120,000 Capsules/Hour
16 Count Tooling

Control Systems for Any Brand of Old and New Tablet Presses

For any query or information on our products

stokes Tablet Presses
267-387-2000
index Capsule Fillers
267-387-3000