Stokes Granulator Model 43-6

Other Products

The Stokes Granulator is specially designed for the reduction of both wet and dry materials into a granular product to a specific size distribution. Changeover from product to product is simple and rapid. The entire stainless steel working section can be removed, thoroughly cleaned and replaced in minutes.

Technical Specifications

CapacityDependent on material and desired particle size
Typical granulating ratesWet mix, through 4 mesh screen = 3,000 lb/hr
Tray dried compound, through 14 mesh screen = 1,200 lb/hr
Tablet slugs, through 10 mesh screen = 900 lb/hr
ScreensSizes from 4 to 16 mesh piano wire; 2 to 100 mesh stainless steel
Hopper size (in.)13 3/4 x 16 1/4
Motor1-H.P., 3 phase, 60 Hertz, 230/460 volts, 1800 RPM
Floor area (in.)42 x 43
Overall height (in.)52
Net weight (lb.)540
Shipping weight (lb.)800
Boxed for export (cu.ft.)51

Additional Mounting Options Available

The Stokes 43-6 Granulator  is available in multiple configurations, including in short configurations for table or bench-top mounting.



Example of a short granulator with extended hopper to process more material


10 ton, Single sided with pre-compression, Accepts B and D tooling, Maximum tablet diameter is 25 mm

10 ton, Double sided or Single sided with pre-compression, Accepts 328 type tooling, Maximum tablet diameter is 30 mm

120,000 Capsules/Hour
16 Count Tooling

Control Systems for Any Brand of Old and New Tablet Presses

For any query or information on our products

stokes Tablet Presses
index Capsule Fillers